page_banner

Rotary Damper Selection Principles

Rotary dampers are widely used in lids, flip-up covers, furniture, and other products that require controlled movement. They provide damping resistance to slow down movement and make it smoother.

But with so many different rotary dampers available, how do we choose the right model?

Choosing a rotary damper is not simply a matter of finding one that fits and can be installed. We also need to consider factors such as torque, damping direction, and working angle.

To help you choose a suitable rotary damper, TOYOU has outlined three basic steps for your reference.

Step 1: Calculate the Required Torque

When selecting a rotary damper, the first step is to estimate how much torque the product generates during movement.

Why do we need to calculate torque first?

Because damping torque is the most important factor to consider when selecting a rotary damper. If the damping torque is too high, the product may move too slowly or even fail to close properly. If the torque is too low, the damper may not provide enough resistance, causing the product to move too quickly.

Therefore, we first need to calculate the reference torque of the product to determine an approximate torque range before selecting a suitable damper.

To learn how to calculate torque for different motion mechanisms, please read:

Rotary Damper Torque Calculation

Learn how to calculate torque for different motion mechanisms.

Step 2: Confirm Damping Direction and Working Angle

After determining the approximate torque range, the next step is to check whether the damper meets the product's basic motion requirements.

There are two important parameters to consider:

Damping Direction

In which direction does the product need damping?

For example, if you want a lid to close slowly but open easily, a one-way rotary damper may be suitable. If you want damping in both directions of rotation, a two-way rotary damper may be a better choice.

For a one-way rotary damper, you also need to confirm whether damping is required in the clockwise (CW) or counterclockwise (CCW) direction.

Working Angle

The working angle determines the range of rotation within which a rotary damper can operate properly.

For example, if a lid needs to rotate 110° and the damper is installed directly on the lid's pivot shaft, the selected damper must be able to accommodate this rotation angle.

If the damping direction is incorrect or the working angle is insufficient, the damper will not provide the intended motion control, even if its torque meets the requirements.

Rotary Damper Torque Calculation

Learn how to calculate torque for different motion mechanisms.

Step 3: Check Torque Curve Matching

After the first two steps, we know the approximate torque range required and have confirmed the damping direction and working angle.

So, can we now select the final damper model?

Not necessarily.

Even if the torque rating meets the requirements, it does not mean the product will have the desired damping performance throughout the entire movement.

For example, for a lid that closes under gravity, the effect of gravity on its rotation changes as the lid moves. At the same time, the damping torque produced by the rotary damper can also be affected by rotational speed, temperature, and other factors.

If the two are not properly matched, the lid may move too quickly at some positions but too slowly at others, or even stop moving.

Therefore, we also need to consider the relationship between the product's Gravity Effect Curve and the damper's Damping Torque Curve.

Our goal is not to make the two curves identical, but to ensure that the damper provides suitable resistance throughout the movement, allowing the product to move smoothly as intended.

Rotary Damper Torque Calculation

Learn how to calculate torque for different motion mechanisms.

Conclusion

By following these three steps, we can gradually narrow down the options and find a rotary damper that better suits the application. However, the final model still needs to be verified through actual installation and sample testing to ensure that the damping performance meets the requirements.

If you have any difficulties selecting a rotary damper, feel free to contact TOYOU. We can help you choose a suitable rotary damper and provide parameter adjustments or custom development services based on your product requirements.